We like to use the welding machine, Migatronic provides us with proper gear for that.
Similar Posts
The weeks before and after the startup
It’s been a busy winter and we haven’t really updated you enough. Heres a quick recap of the last week and the first burnout video with the new engine 🙂 You will get more posts about the specifics of the engine as Jesse have the time to write em.
Software developing
Last blog post was about improved fuel system, this time I will take a minute to talk about software modifications. Our OM648 320cdi engine is controlled by Bosch EDC16 engine control unit (ECU). Pretty much everything is controlled electronically on this system. There too many features to list that ECU controls and observes, but here…
First testrun.
Yesterday we decided to go testdrive the car with only one and a half day left before we leave for England. There was som fixes to be done before it was drivable, like fitting the sponsor stickers and som less important things like fitting a seat and harness for Teemu. As usual we were a couple of hours…
Daily driver is back!
[vc_row][vc_column][vc_column_text]In this episode we only fire it up after almost two years of not even touching it. As usual, everything goes as planned.[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_video link=”https://www.youtube.com/embed/zBqBm617otY”][/vc_column][/vc_row]
Kemora test-day (Images)
Pictures from yesterdays test-runs at Kemora.
Garbage garage 3/2018
"Not the most successful drifting team" goes next level in this episode, when we're taking apart the front end of our racecar and looking at what is wrong with it. Please subscribe to our youtube channel, we have a lot more interesting stuff coming right up (and also! Youtube favors videos that gets subscribers, so…