POP -Socket
4,03 €- Cool design
- Table support
- Good grip
- In stock!
Showing 1–88 of 92 results
-
-
-
-
-
Waterpump plate
20,16 €- Remove stock waterpump with this plate
- 6mm Aluminium
- Fits om611-613 and om646-648
- In stock!
-
Dual HP -pump adapters
362,90 €- Second pump adapter and bolts
- coupling to cam gear
- highpressure pipe to rail
- modificated fuel rail
- In stock!
-
Custom CrMo Head Studs
354,84 €- Set of 14
- Fits all CDI engines
- Heat treated
- Price includes ARP nuts
- In stock!
-
-
Performance Street camshafts
524,19 €- Plug & Play
- Maximum lift and duration
- Perfect for street use
- In stock!
-
-
-
-
-
-
Mercedes CDI H-profile connection rod with bolts
92,75 €- H-profile connection rod.
- 4340, HRC 35-40
- Balanced within 5g.
- Bolts: 3/8′- 1.600′ included
- In stock!
-
Mercedes CDI H-profile connection rod with ARP bolts
104,04 €- H-profile connection rod.
- 4340, HRC 35-40
- Balanced within 5g.
- Bolts: 3/8′- 1.600′ ARP included
- In stock!
-
Performance sinter 4-puck disc 240mm
145,16 €- Fits our pressure plate and flywheel
- gs6-37dz
- gs6-53dz
- gs5-39dz
- In stock!
-
Bosch 200 fuel pump (new 044)
177,42 €- 275l/h @ 5 bar
- Rated for diesel!
- Enough for 700hp
- We run these in the racecar
- In stock!
-
BMW M5 performance “765” pressure plate
290,32 €- 600Nm (up to 780Nm with sinter plate)
- Fits our flywheel
- For 9,2mm clutch plate
- In stock!
-
-
Bolts for connection rods – Pair
12,10 €- Made in China
- Copy of ARP bolt
- Fits our om648 conrods
- Fits our om606 conrods
- In stock!
-
Gold membership
From: 79,84 €- Limited edition "gold member" cap.
- Place on the Member wall on the webpage.
- Eternal gratitude from the team.
- Signed inside by Teemu.
- In stock!
-
-
Service trousers 4-way stretch
79,84 €- Teemus favourite pants
- Fits like long johns
- For work&pleasure
- In stock!
-
-
-
Blåkläder Lined flannel shirt with leather patch
48,31 €- The ultimate lined flannel
- Blåkläder quality
- Best price online!
- In stock!
-
Mercedes diesel performance street injectors
From: 967,74 €- One year warranty
- Design to work optimally with original pistons.
- Up to 75 hp per cylinder
- Every set is individually tested and balanced
- Injector map provided if needed
- OM648, OM647, OM646
- In stock!
-
-
722.6 Transmission controller OF Gear
693,55 €- Complete kit
- 2,4" OLED display
- Perfect for engine swaps
- In stock!
-
-
Hybrid softshell jacket
95,97 €- Stretchy, warm, breathable
- Also works as midlayer
- Blåkläder quality
- In stock!
-
-
-
ARP studs set for girdle plate – Pair
39,52 €- Studs, nuts and washers included
- Genuine ARP quality
- Perfect with our girdle plate
- In stock!
-
-
Billet flywheel
258,06 €- For 765 clutch
- Smaller model start ring dimension need to be ~275.25mm
- Om613/648 model need start ring from stock fly wheel
- In stock!
-
-
-
Garrett G35-1050
1 878,23 €- Garrett G Series compressor aerodynamics for maximum HP
- 68mm turbocharger compressor option
- New turbine wheel aero constructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed sensor and pressure ports
- In stock!
-
Garrett G35-900
1 685,48 €- Garrett G Series compressor aerodynamics for maximum HP
- 62mm turbocharger compressor option
- New turbine wheel aero constructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed sensor and pressure ports
- In stock!
-
Garrett G30-900
1 854,03 €- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
- In stock!
-
Garrett G30-770
1 450,81 €- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
- In stock!
-
Garrett G30-660
1 410,48 €- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
- In stock!
-
Garrett G25-660
1 442,74 €- New G Series compressor aerodynamics for maximum HP
- Fully machined speed sensor and pressure ports
- New turbine wheel aero constructed of Mar-M alloy rated up to 1050 ºC
- Stainless steel wastegated and non-wastegated turbine housing options rated for up to 1050 ºC
- Oil restrictor and water fittings included
- In stock!
-
Garrett G25-550
1 329,84 €- Garrett G Series compressor aerodynamics for maximum HP
- Fully machined speed sensor and pressure ports
- New turbine wheel aero constructed of MAR-M alloy rated up to 1050 ºC
- Stainless steel wastegated and non-wastegated turbine housing options rated for up to 1050 ºC
- Oil restrictor and water fittings included
- In stock!
-
-
-
-
-
-
Mercedes diesel performance race injectors
From: 1 161,29 €- One year warranty
- Up to 110hp per cylinder (race version)
- Every set is individually tested and balanced
- Injector map provided if needed
- In stock!
-
Garrett – Turbocharger GBC22-350
636,29 €- Horsepower 200 –350
- Displacement 1.0L –2.5L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
- In stock!
-
Garrett – Turbocharger GBC20-300
604,03 €- Horsepower 170 –300
- Displacement 0.8L –2.0L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
- In stock!
-
Garrett – Turbocharger GBC17-250
571,77 €- Horsepower 150 –250
- Displacement 0.6L –1.5L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
- In stock!
-
Garrett – Turbocharger GBC14-200
523,39 €- Horsepower 140 –200
- Displacement 0.4L –1.0L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
- In stock!
-
OM628 400cdi v8 High Pressure pump – used
346,77 €- More fuel than any om64X -pump
- fits om648, om613
- 450hp+
- In stock!
-
-
-
-
-
Custom valve spring upgrade set
From: 206,45 €- Fits om611, om612, om613, om646, om647, om648, om604, om605, om606.
- Run as much boost as you want
- In stock!
-
ARP Bolts for connection rods – Pair
23,39 €- ARP Quality
- Fits our om648 conrods
- Fits our om606 conrods
- In stock!
-
om648 H-Profile connection rod without bolts
80,65 €- Fits om611, om612, om613, om646, om647, om648
- Tested at 670+hp
- In stock!
-
KTM Graphics set
161,29 €- 2012-2021 SX & EXC models
- High quality graphics
- Can be customized
- In stock!
-
THIS SHIRT IS GREY, SAME AS IN PICTURES BUT GREY.
-
Mercedes Diesel Race camshafts
- We run these in our racecar
- A lot more flow
- To be fitted with solid lifters
- In stock!
-
Software file
322,58 €- ECU software upgrade
- Available worldwide!
- More HP to your street car!
- In stock!
-
-
OM648/OM613/OM606/M104 Girdle plate
208,87 €- Also for om606
- We use this in the racecar
- 10mm thick
- In stock!
-
OM648 Custom pistons
From: 120,16 €- 14:1 compression ratio
- More valve clearance
- We run these in the racecar
- In stock!
-
Mercedes custom Diesel street swap ECU
From: 604,84 €- Plug & Play
- Possible to tune remotely
- Also for engine swaps
- We run this in the racecar
- om611, om612, om613, om646, om647, om648
- In stock!
-
Sale!
-
-
-
-
Blåkläder Craftsman shorts denim stretch
79,84 €- Craftsman shorts!!
- Stretch fabric in crotch
- Very good looking!
- In stock!
-
-
Zip-Up Shell Jacket
47,58 €- Rain repellent
- Outdoor softshell
- Amazing quality!
- Highly liked!
- In stock!
-
-
-
Blåkläder Service trousers stretch – Denim
104,84 €- Proud to sell these
- Blåkläder quality
- Stretchy and comfy
- Best price online!
- In stock!
