Näytetään tulokset 1–88 / 93
-
4,03 €
- Cool design
- Table support
- Good grip
-
32,26 €
- Technical T-shirt
- 2023 livery design
- Limited edition
-
-


354,84 €
- Plug & Play
- Cars, boats, engine swaps
-
20,16 €
- Remove stock waterpump with this plate
- 6mm Aluminium
- Fits om611-613 and om646-648
-
362,90 €
- Second pump adapter and bolts
- coupling to cam gear
- highpressure pipe to rail
- modificated fuel rail
-
354,84 €
- Set of 14
- Fits all CDI engines
- Heat treated
- Price includes ARP nuts
-
-
524,19 €
- Plug & Play
- Maximum lift and duration
- Perfect for street use
-


24,19 €
- Hyvä korkea istuvuus
- Näitä ei ole loputtomasti
-

9,68 €
- Kolme tyyliä - Yksi koko
- Puuvillasekoite
- Välttämättömyys
-

28,23 €
- Sopivan stretsi
- Mukava päällä ja alla
- Hieno lappunen vasemmassa hihassa
-
80,65 €
- Käytetty Bosch suutin
- Toimivuustakuu
-
48,39 €
- Suuttimen huolto
- Sisältää tarkistusmittauksen
-
92,75 €
- H-profile connection rod.
- 4340, HRC 35-40
- Balanced within 5g.
- Bolts: 3/8′- 1.600′ included
-
Arvostelu tuotteesta: 5.00 / 5
104,04 €
- H-profile connection rod.
- 4340, HRC 35-40
- Balanced within 5g.
- Bolts: 3/8′- 1.600′ ARP included
-
145,16 €
- Fits our pressure plate and flywheel
- gs6-37dz
- gs6-53dz
- gs5-39dz
-
177,42 €
- 275l/h @ 5 bar
- Rated for diesel!
- Enough for 700hp
- We run these in the racecar
-
290,32 €
- 600Nm (up to 780Nm with sinter plate)
- Fits our flywheel
- For 9,2mm clutch plate
-
-
12,10 €
- ARP kopiot
- Sopii meidän om606 -kankiin
- Sopii meidän om648 -kankiin
-
Alk. 79,84 €
- Limited edition gold member -lippiksen
- Paikan jäsen-seinälle, kotisivuilla
- Ikuinen kiitollisuus tiimiltä
-
208,87 €
- Sopii viisisylinterisiin
- Meillä kilpaautossa vastaava
- 10mm paksu
-
79,84 €
- Teemun lempihousut
- Yhtä mukavat kuin pitkät kalsarit
- Arkeen ja pyhään
-
-
-
48,31 €
- Paras vuorattu flanellipaita ikinä
- Blåkläder laatu
- Paras hinta meiltä!
-
Alk. 967,74 €
- Vuoden takuu
- Jopa 100hv per sylinteri (street versio)
- Jokainen setti on tarkistettu ja tasapainossa
- Saat mukaan suutinkartan tarvittaessa
-
20,16 €
- Cleans the common-rail system well
- Works with all brands
- Cheap!
-
693,55 €
- Complete kit
- 2,4" OLED display
- Perfect for engine swaps
-
72,58 €
- Leather label
- Excellent midlayer
- Blåkläder quality
-
95,97 €
- Stretchy, warm, breathable
- Also works as midlayer
- Blåkläder quality
-
24,19 €
- Musta villapipo
- Erittäin hyvä laatu
- 100% Merinovilla
-
24,19 €
- Punainen villapipo
- Erittäin hyvä laatu
- 100% Merinovilla
-
39,52 €
- Studs, nuts and washers included
- Genuine ARP quality
- Perfect with our girdle plate
-
64,52 €
- New coupling included
- Run up to 5 bars of boost
-
258,06 €
- For 765 clutch
- Smaller model start ring dimension need to be ~275.25mm
- Om613/648 model need start ring from stock fly wheel
-
48,39 €
- Kolme väri
- Black smoke logo
- Hieno 👌
-
-
1 878,23 €
- Garrett G Series compressor aerodynamics for maximum HP
- 68mm turbocharger compressor option
- New turbine wheel aero constructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed sensor and pressure ports
-

1 685,48 €
- Garrett G Series compressor aerodynamics for maximum HP
- 62mm turbocharger compressor option
- New turbine wheel aero constructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed sensor and pressure ports
-

1 854,03 €
- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
-
1 450,81 €
- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
-
1 410,48 €
- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
-
1 442,74 €
- New G Series compressor aerodynamics for maximum HP
- Fully machined speed sensor and pressure ports
- New turbine wheel aero constructed of Mar-M alloy rated up to 1050 ºC
- Stainless steel wastegated and non-wastegated turbine housing options rated for up to 1050 ºC
- Oil restrictor and water fittings included
-
1 329,84 €
- Garrett G Series compressor aerodynamics for maximum HP
- Fully machined speed sensor and pressure ports
- New turbine wheel aero constructed of MAR-M alloy rated up to 1050 ºC
- Stainless steel wastegated and non-wastegated turbine housing options rated for up to 1050 ºC
- Oil restrictor and water fittings included
-
Arvostelu tuotteesta: 5.00 / 5
Alk. 233,87 €
-
-
-
- Laatu: Susi
- Ulkonäkö: Kamala
- Jokainen erilainen
- Jotkut jopa huonompia kuin kuvassa
-
-
48,39 €
- Fits in standard plug
- Run up to 3bars of boost
-
Arvostelu tuotteesta: 5.00 / 5
Alk. 1 161,29 €
- Vuoden takuu
- Jopa 100hv per sylinteri (street versio)
- Jokainen setti on tarkistettu ja tasapainossa
- Saat mukaan suutinkartan tarvittaessa
-
636,29 €
- Horsepower 200 –350
- Displacement 1.0L –2.5L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
-
604,03 €
- Horsepower 170 –300
- Displacement 0.8L –2.0L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
-
571,77 €
- Horsepower 150 –250
- Displacement 0.6L –1.5L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
-
523,39 €
- Horsepower 140 –200
- Displacement 0.4L –1.0L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
-
346,77 €
- More fuel than any om64X -pump
- fits om648, om613
- 450hp+
-
20,16 €
- Metal hinges
- uv400 protection
- Blue mirror lens
-
20,16 €
- Metal hinges
- uv400 protection
- Blue mirror lens
-
927,42 €
- Konepelti
- Lokasuojat
- Etupuskuri + lippa
-
451,61 €
- Sopii w201, w202 ja w124
- Kestää 600hv
- Myös vaihdelaatikot ja kytkimet meiltä.
-
Alk. 206,45 €
- Sopii om611, om612, om613, om646, om647, om648, om604, om605, om606
- Ahda näiden avulla moottoria niin paljon tykkäät
-
23,39 €
- ARP laatua
- Sopii meidän om606 -kankiin
- Sopii meidän om648 -kankiin
-
80,65 €
- Sopii om611, om612, om613, om646, om647, om648
- Sopii om648 mäntään
- Kestää 700hv
-
161,29 €
- 2012-2021 SX & EXC models
- High quality graphics
- Can be customized
-
Sale!
-
Arvostelu tuotteesta: 5.00 / 5
- Käytämme kilpaautossa tällaisia
- Plug & Play!
- Huomattava ero vakionokkiin
-
322,58 €
- Ohjelman päivitys, autoon kuin autoon.
- Katso asennuspaikat täältä
- Helpolla lisää heppoja katuautoon!
-
Arvostelu tuotteesta: 5.00 / 5
55,65 €
- Sopii: om611, om612, om613, om646, om647, om648
- CrMo
- Pakko käyttää!
-
Arvostelu tuotteesta: 5.00 / 5
208,87 €
- Sopii myös om606
- Meillä kilpaautossa tämä käytössä
- 10mm paksu
-
Alk. 120,16 €
- 14:1 puristussuhde
- Lisää tilaa venttiileille
- Nämä on meillä kilpaautossa käytössä
-
Arvostelu tuotteesta: 5.00 / 5
Alk. 604,84 €
- Plug & Play
- Voidaan ohjelmoida etänä
- Myös moottoriswäppeihin
- Tämä on meillä käytössä kilpaautossa
- om611, om612, om613, om646, om647, om648
-
Sale!
-
Arvostelu tuotteesta: 5.00 / 5
48,39 €
-
-
-
-
Arvostelu tuotteesta: 4.92 / 5
47,58 €
-
Arvostelu tuotteesta: 4.88 / 5
47,58 €
-
Arvostelu tuotteesta: 5.00 / 5
4,03 €
- Tehty öljystä, ei puusta
- Kestää ikuisuuden
- Monta tarraa!
-