Näytetään tulokset 1–88 / 95
-
VALMIS PAKETTI
3 035,48 € Original price was: 3 035,48 €.2 895,16 €Current price is: 2 895,16 €.
-
120,97 €
- Vuoden takuu
- 65hv per sylinteri
- Saat mukaan suutinkartan tarvittaessa
- Näitä löytyy joistain W203 200cdi mallista
- Tehdas uusi
-
24,19 €
- Koot 86-122-146
- 100% puuvillaa
- Upea merkintä käsivarressa
- Sama malli kuin aikuisilla
-
-
-
-
-
-
-
233,06 €
- OBD-yhteys virtuaalilukutilassa
- Ei kuukausimaksua
- Laaja ajoneuvo yhteensopivuus
- Ilmaiset päivitykset
-
-
Alk. 483,87 €
- Myös moottoriswäppeihin
- om629, om642, om646, om647, om648
-
-
-
VALMIS PAKETTI
3 035,48 € Original price was: 3 035,48 €.2 895,16 €Current price is: 2 895,16 €.
-
-
-
750,00 €
- High-performance Race Series
- Kestää 1000hv
- Suunniteltu kilpa-käyttöön
-
750,00 €
- High-performance Race Series
- Kestää 1000hv
- Suunniteltu kilpa-käyttöön
-
959,68 €
- Helppo ratkaisu
- Riittää 370hv
- Sopii suoraan paikalle
-
24,19 €
- UV400
- Metalliset sangat
- Metallinen logo
-
-
-
-
-
4,03 €
- Cool design
- Table support
- Good grip
-
40,32 €
- Paksu ja mukava
- Hyvä
- Isot printit
-
354,84 €
- Plug & Play
- Autot, veneet, swapit
-
362,90 €
- Toisen pumpun sovituskappale
- Kytkin nokkapyörään
- KP -putki railitukkiin
- Muutettu railtukki
-
354,84 €
- Set of 14
- Fits all CDI engines
- Heat treated
- Price includes ARP nuts
-
-
524,19 €
- Plug & Play
- Maximum lift and duration
- Perfect for street use
-
9,68 €
- Kolme tyyliä - Yksi koko
- Puuvillasekoite
- Välttämättömyys
-
28,23 €
- Sopivan stretsi
- Mukava päällä ja alla
- Hieno lappunen vasemmassa hihassa
-
80,65 €
- Käytetty Bosch suutin
- Toimivuustakuu
-
64,52 €
- Suuttimen huolto
- Sisältää tarkistusmittauksen
-
91,13 €
- Balanced within 5g.
- Bolts: ARP 3/8′- 1.600′ included
- Fits om606, om605, om604
- Use CDI bearings (OM61x-om64x)
-
145,16 €
- Fits our pressure plate and flywheel
- gs6-37dz
- gs6-53dz
- gs5-39dz
-
177,42 €
- 275l/h @ 5 bar
- Rated for diesel!
- Enough for 700hp
- We run these in the racecar
-
290,32 €
- 600Nm (up to 780Nm with sinter plate)
- Fits our flywheel
- For 9,2mm clutch plate
-
-
12,10 €
- ARP kopiot
- Sopii meidän om606 -kankiin
- Sopii meidän om648 -kankiin
-
208,87 €
- Sopii viisisylinterisiin
- Meillä kilpaautossa vastaava
- 10mm paksu
-
79,84 €
- Teemun lempihousut
- Yhtä mukavat kuin pitkät kalsarit
- Arkeen ja pyhään
-
56,45 €
- Paras vuorattu flanellipaita ikinä
- Blåkläder laatu
- Paras hinta meiltä!
-
Alk. 967,74 €
- Vuoden takuu
- Jopa 100hv per sylinteri (street versio)
- Jokainen setti on tarkistettu ja tasapainossa
- Saat mukaan suutinkartan tarvittaessa
-
20,16 €
- Cleans the common-rail system well
- Works with all brands
- Cheap!
-
-
725,00 €
- Complete kit
- 2,4" OLED display
- Perfect for engine swaps
-
72,58 €
- Leather label
- Excellent midlayer
- Blåkläder quality
-
95,97 €
- Stretchy, warm, breathable
- Also works as midlayer
- Blåkläder quality
-
24,19 €
- Musta villapipo
- Erittäin hyvä laatu
- 100% Merinovilla
-
24,19 €
- Punainen villapipo
- Erittäin hyvä laatu
- 100% Merinovilla
-
COMPLETE SET
504,03 € Original price was: 504,03 €.453,63 €Current price is: 453,63 €.
-
39,52 €
- Studs, nuts and washers included
- Genuine ARP quality
- Perfect with our girdle plate
-
64,52 €
- Liitin sisältyy
- Tällä pystyt käyttämään korkeita ahtopaineita
-
-
-
Alk. 1 975,00 €
- Garrett G Series compressor aerodynamics for maximum HP
- 68mm turbocharger compressor option
- New turbine wheel aero constructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed sensor and pressure ports
-
Alk. 1 918,55 €
- Garrett G Series compressor aerodynamics for maximum HP
- 62mm turbocharger compressor option
- New turbine wheel aero constructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed sensor and pressure ports
-
1 692,74 €
- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
-
1 652,42 €
- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
-
1 628,23 €
- Garrett G Series compressor aerodynamics for maximum HP
- New turbine wheel aero contructed of MAR-M alloy rated for up to 1050° C
- Stainless steel turbine housing options rated for up to 1050° C
- Oil restrictor and water fittings included
- Fully machined speed senson and pressure ports
-
1 604,03 €
- New G Series compressor aerodynamics for maximum HP
- Fully machined speed sensor and pressure ports
- New turbine wheel aero constructed of Mar-M alloy rated up to 1050 ºC
- Stainless steel wastegated and non-wastegated turbine housing options rated for up to 1050 ºC
- Oil restrictor and water fittings included
-
1 491,13 €
- Garrett G Series compressor aerodynamics for maximum HP
- Fully machined speed sensor and pressure ports
- New turbine wheel aero constructed of MAR-M alloy rated up to 1050 ºC
- Stainless steel wastegated and non-wastegated turbine housing options rated for up to 1050 ºC
- Oil restrictor and water fittings included
-
-
-
-
-
48,39 €
- Fits in standard plug
- Run up to 3bars of boost
-
Alk. 1 161,29 €
- Vuoden takuu
- Jopa 100hv per sylinteri (street versio)
- Jokainen setti on tarkistettu ja tasapainossa
- Saat mukaan suutinkartan tarvittaessa
-
636,29 €
- Horsepower 200 –350
- Displacement 1.0L –2.5L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
-
604,03 €
- Horsepower 170 –300
- Displacement 0.8L –2.0L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
-
571,77 €
- Horsepower 150 –250
- Displacement 0.6L –1.5L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
-
523,39 €
- Horsepower 140 –200
- Displacement 0.4L –1.0L
- Integrated wastegate assembly with calibrated actuator
- Billet compressor wheel with extended tip design for higher pressure ratio capability
- GTX Gen II compressor aero with modern gasoline turbine wheel aero
- Inconel turbine wheel material
- Ductile iron (SiMo+) turbine housing material
- Latest generation of journal bearing rotor group
- 360-degree thrust bearing
- Oil-cooled center housing
- Boost signal port with installed plug
- Designed to use existing 480009 actuators
-
358,87 €
- More fuel than any om64X -pump
- fits om648, om613
- 450hp+
-
67,74 €
- Sopii om604, om605, om606
- Meiltä myös pultit!
- Kestää 700hv
-
1 612,90 €
- Konepelti
- Lokasuojat
- Etupuskuri + lippa
-
Alk. 206,45 €
- Sopii om611, om612, om613, om646, om647, om648, om604, om605, om606
- Ahda näiden avulla moottoria niin paljon tykkäät
-
23,39 €
- ARP laatua
- Sopii meidän om606 -kankiin
- Sopii meidän om648 -kankiin
-
80,65 €
- Sopii om611, om612, om613, om646, om647, om648
- Sopii om648 mäntään
- Kestää 700hv
-
-
1 209,68 €
- Käytämme kilpaautossa tällaisia
- Plug & Play!
- Huomattava ero vakionokkiin
-
Arvostelu tuotteesta: 5.00 / 5
322,58 €
- Ohjelman päivitys, autoon kuin autoon.
- Katso asennuspaikat täältä
- Helpolla lisää heppoja katuautoon!
-
55,65 €
- Sopii: om611, om612, om613, om646, om647, om648
- CrMo
- Pakko käyttää!
-
208,87 €
- Sopii myös om606
- Meillä kilpaautossa tämä käytössä
- 10mm paksu
-
Alk. 120,16 €
- 14:1 puristussuhde
- Lisää tilaa venttiileille
- Nämä on meillä kilpaautossa käytössä
-
Alk. 604,84 €
- Plug & Play
- Voidaan ohjelmoida etänä
- Myös moottoriswäppeihin
- Tämä on meillä käytössä kilpaautossa
- om611, om612, om613, om646, om647, om648