OM648 H-Profile connecting rod with bolts
102,79 €
- Fits OM61x and OM64x engines
- Tested at 820whp!

In stock

30 päivää maksuaikaa. Valitse maksutapa kassalla.
World wide shipping!
- EU zone 1–3 working days
- Elsewhere in the world 2–8 working days
Description
For om648 bearings.
Length C to C: 149mm.
Material: 4340
HRC: 35-40
Balanced within 5g
For 30mm pin
Also fits OM613.
Bolts torque 75Nm.
Ordering and installation
- Use grease when tightening bolts
- Use stock bearings
Additional information
Weight | 0,7 kg |
---|---|
Dimensions | 21 × 8 × 2,7 cm |
Engine | |
HRC | 35-40 |
Balancing | Set is balanced within 5g |
Piston pin size | 30mm |
Bearing | om648 STD |
Torque | 75Nm |
Frequently Asked Questions
Yes they do, however the 613 connecting rods do not work with om648 pistons because of the chamfer that om648 pistons require.
That is a tricky question, it depends also on the engine tune, how much you rev the engine and on the torque spec. Generally we recommend upgraded stock connecting rod bolts when going above 400hp and our connecting rods when going for 500hp.
Reviews
There are no reviews yet.