Home » Shop » Bolt for OM651 Delphi Injector
Injectors

Bolt for OM651 Delphi Injector

3,98 € + DHL or Economy shipping

This bolt is suitable for a single Delphi injector of Mercedes engine model OM651. They ensure a secure and reliable fit for optimal engine performance. Made from high-quality, durable materials for long-lasting use. We have only ever used stock ones in all our engines.

Please order the correct quantity based on the number of injectors you have.

  • For OM651 Delphi injectors
  • High-quality
  • Durable material
Generic - Products

30 päivää maksuaikaa. Valitse maksutapa kassalla.

World wide shipping!

  • Check Mark EU zone 2–5 working days
  • Check Mark Elsewhere in the world 2–8 working days
GUARANTEED SAFE CHECKOUT
  • Stripe
  • Visa Card
  • MasterCard
  • American Express
  • PayPal
Categories: , , ,

Description

Ordering and installation

This product is a standard part and fits completely in standard parts place, no modifications needed.

  • Make sure your threads are clean, this is by far the most common problem with injector bolts on these engines.
  • Below is a hack video on how to clean injectors threads, watch it! In short, use the old bolts as a cleaning tool, and clean out MANY TIMES, until the bolt does not catch any debris at all whe screwed back and forth.
  • Tightening torque on these bolts is 7Nm +90deg +90deg
  • Do not use same bolt twice!

 

@blacksmokeracing

Tämän yksinkertaisen operaationkin voi tehdä monella tavalla väärin, tässä oikea! Trodolta kupongilla black50 – yli 50€ tilauksiin ilmainen toimitus! #varaosat #trodo #mekaanikko #mersu #suutin

♬ original sound – Black Smoke Ltd

 

Additional information

Weight 0,1 kg
Dimensions 5 × 2 × 2 cm
Torque

7Nm +90deg +90deg
Size

Standard

Reviews

There are no reviews yet.

Be the first to review “Bolt for OM651 Delphi Injector”

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Frequently Asked Questions

What do I do if my injector bolts threads are damaged?

Use helicoil, there is room to drill it out and insert an M6 helicoil. We have had this method work many times.

Why is my injector not sealing?

The bottom might be damaged, it needs to be cleaned properly for this a small metal brush attached to drill. In worst case scenarios the bottom needs to be cleaned with a reamer, please avoid using this method and if there is no other option use it very carefully to remove as little as possible from the seal surface and have a professional do it for you.

There are different sized seals / washers available, what are those for?

You never need to use thicker seals/washers, the standard measurement is always good.

You may also like…

Related products