
Similar Posts

Engine demount & cleaning up for painting
Because of work, Teemu could not be with us this session so he just brought us some pastries (very much appreciated, atleast judging by Emils flabbergasted face on the picture (:) Emil made the cardboard models for both the driver and passenger side floor plates. Here’s also a few pictures of the finished steering and…

After the first test
The first test ended with a lot of worries and later the same night relief when we tough we had fixed the problem. Next day we were proved wrong again as the pump jammed when Teemu was testing it at the garage. At this point we didn’t have any more pumps so Teemu and Ville took both pumps with them…

Garbage Garage 8-2018 – More washing
Now we have a “new” engine and next we need to start taking the old one out to see what went wrong in the last race. Stay tuned for more and please support us by buying our merchandise! 🙂

Rollcage n’ Stuff – W203 stiffening up
Next up is a rollcage, the rollcage is an essential part of a drifting car as you’re not allowed to enter any higher level drifting event without it. This mechanical structure that offers great safety is nothing but familiar to Teemu as the w123 was pretty much held together by merely the rollcage. The guys…

Cooling System | 08-2022
Planning the cooling system and almost last fixes before primer. Check out tuning parts and more in our shop! Now we have new street performance injectors and 606 and 648 pistons back in stock!

Kemora test-day (Images)
Pictures from yesterdays test-runs at Kemora.