
Similar Posts

Preparing for stuff without bus! – 46-2020
Bus is broken, which means we need some other form of transportation, Teemu bought a trailer but everything is not upside down. Kalle and Teemu fixed some new tubing during the weekend and hopes are high. Enjoy the video and take a look at our software and hardware for tuning your car!

Engine fitted, dashboard done!
Engine is mounted fitted and piping has started. Enjoy some pictures! We replaced the oil pump and changed the gear for it to get rid of the cavitation. The wheel did not fit properly in the oil pan so we remade it a little, check out the pics (; Oil coolers are fitted and tubing…

Episode 36/2020
Autumn is here, pick some warmer stuff from our shop to put on! Since you are here to watch the video with the coupon 362020 you get 17% off your purchase during this weekend! In this episode we get done with the stripping and start rebuilding the rear part of the car, also we test…

Exhaust manifold variations
There has been some debate about different exhaust manifolds on CDI engines. Some think that longer manifold with colletor is the only way. On the other hand some say that the right way is to get a manifold that is as short as possible. Long exhaust manifold: Those who shout out for long manifold think…

Mantorp September 2017
[vc_row][vc_column][vc_column_text]This was a really troublesome weekend, the last event of the season turned out to be a real nightmare. Please tune in on our social media channels during the winter to see what we’re up to.[/vc_column_text][vc_video link=”https://youtu.be/MpXMSYkWGj4″][/vc_column][/vc_row][vc_row][vc_column][/vc_column][/vc_row]

44-2021 – Jurva Championship
Check out our Mercedes race parts! The CDI engine we consider almost figured out, we have already started to roll out the parts for that engine. If you are building one and need the proper parts, please shoot us an email on info@blacksmokeracing.com In this episode we are at Jurva for the Finnish championship, it…