Similar Posts
Engine fitted, dashboard done!
Engine is mounted fitted and piping has started. Enjoy some pictures! We replaced the oil pump and changed the gear for it to get rid of the cavitation. The wheel did not fit properly in the oil pan so we remade it a little, check out the pics (; Oil coolers are fitted and tubing…
Epua drifting race and TURBO RESELLER! | 13-2021
Epua drifting race and TURBO RESELLER! | 13-2021 Troublesome weekend in Seinäjoki. We broke our car and the borrowed cars but still went home with a smile 🙃Remember to subscribe to the channel! Check out the Junkyard! Mercedes Performance Parts
Exhaust manifold variations
There has been some debate about different exhaust manifolds on CDI engines. Some think that longer manifold with colletor is the only way. On the other hand some say that the right way is to get a manifold that is as short as possible. Long exhaust manifold: Those who shout out for long manifold think…
Exhaust system almost done!
As Teemu was busy working today, his father stepped in to take his position. This job mostly means driving us to do things faster, I’m not sure wether we’re slow or Teemu is fast but I would love to think it’s the later. Anyway things went on and we actually got a lot done. “3.4…
Rebuilding the 203 setup
At gatebil we broke the engine and the turbo, we’re now changing the setup a little, we’re getting a new, a bit bigger turbo and we’re getting rid of the supercharger. Why? because it produces too much heat. Two of the six pistons had melted and a few of the exhaust valves were all…