Posted on

ENGINE ADVENTURE | GARBAGE GARAGE 2-2018

Spoiler: the engine goes on an adventure! We are on fire, the engine has been removed and Jesse now has the ball on his side of the court. See the whole story on our second episode of season 2018. We will soon do a bigger write up on what is going on with the setup…

Read more

Posted on

FIRST THINGS FIRST – GARBAGE GARAGE 1/2018

Yes, we are trying to fire it up again! Here is the first episode of the 2018 garage adventures. It is now almost too late to start working for 2018, so we decided to start, however, Nikos BMW needed a tyre change and the racecar was still in the bus. The video speaks pretty much…

Read more

Posted on

Garbage tour was a success!!

Black Smoke Garbagegarage Tour

We organised a “small” tour in from our hometown and through a couple of villages, surprisingly not just home to a few Mercedeses! Starting in Kokkola 13:00 we gathered up at ABC, a local gas-station and waited until 13:45 for people to show up for the tour. Behold 11 cars had lined up at the…

Read more

Posted on

A little info on the 2015-2016 CDI project

A little info on the 2015-2016 racecar + Teemu answers some bonus questions! The idea behind the project/Tanken bak prosjektet: The idea is the same as is has been since we started, building a car that we can compete with. When and why did you buy this car/Når kjøpte du bilen? We got this car for free…

Read more

Posted on

Backwoods cruising and a working engine

Big thanks to Backwoods Customs for the hospitality and an amazing event! Backwoods cruising went straight to the top5 events we have ever been part of. The greatest news are that the car is now working as it should. Developing the cdi engine has been a long and hard road. The car has not worked…

Read more

Posted on

Breaking the first engine of the season

I was writing a final post about the last modifications to the new engine for this season but since we already broke it i decided to write this one first. So we already have been to two “driving” events this season, very early for us, Elmia in Jönköping Sweden and Seinäjoki in Finland. We had…

Read more

Posted on

Throwback: Gatebil Rudskogen 2015 (video)

Black Smoke - Gatebil Rudskogen 2015 video

Throwback to the Gatebil main event in 2015. Filmed in July 2015. With English subs. Aerials by Engen Pikselindustri – http://pikselindustri.no/ Music by Cartridge 1987 – https://soundcloud.com/cartridge1987 Video by PIFA – http://www.pifa.fi Chase cars by – Team pony drift, Viktor Mårtensson, TV2 Norway www.teemupeltola.fi www.pifa.fi www.kokkolanautohuolto.fi www.migatronic.fi www.parkkila.fi

Read more

Posted on

Engine development

The piston

As we told you last time we have some improvements planned for next season to the CDI engine. Jesse will make a post with more technical details later but here’s a teaser about what we have planned. Jesse dissembling the om648 The first upgrade Jesse wanted to do was modifying the fuel line. He and…

Read more

Posted on

Checking the CDI engine after 4 races

So as we told you last time we brought the CDI engine to Kokkolan Autohuolto so Jesse could disassemble it and check what it looked like. Engines ready to be dissembled. After opening the engine nothing seems to have completely broken. The fourth piston shoved some signs of melting. The more worrying thing was that…

Read more

Posted on

Exhaust manifold variations

Exhaust manifold variations. Version 2.

There has been some debate about different exhaust manifolds on CDI engines. Some think that longer manifold with colletor is the only way. On the other hand some say that the right way is to get a manifold that is as short as possible. Long exhaust manifold: Those who shout out for long manifold think…

Read more

Posted on

Software developing

Test bench

Last blog post was about improved fuel system, this time I will take a minute to talk about software modifications. Our OM648 320cdi engine is controlled by Bosch EDC16 engine control unit (ECU). Pretty much everything is controlled electronically on this system. There too many features to list that ECU controls and observes, but here…

Read more

Posted on

First real testing with the om648 (video)

This weekend we participated in the car show AutoSaloon, the event was in Turku. We also revealed the new livery for 2015. Read more about the 2015 setup and testing here

Read more

Posted on

OM648 First testing at kemora (video)

You’ve probably heard all about the testing day but we still like to show more. Enjoy the video, english subtitles on youtube. Read more about the 2015 setup and testing here

Read more

Posted on

Higher pressure and more fuel volume!

Original high pressure pump (HPP) will not be able to maintain selected pressure level if we increase the amount of fuel going it to the engine. That is why we needed to find bigger HPP. Mercedes 400cdi has one that fits our 320cdi pretty easily.  It is capable of producing bigger fuel volume at same…

Read more

Posted on

Kemora test-day

Found some leaks after the first spin.

We have already driven the car in the bench a couple of times to test the mechanical functions but the engine map is to far of the chart to get it right in the bench. Therefore we decided to go to the local race-track, Kemora, for a couple of setup-laps. The car with the current…

Read more