[vc_row][vc_column][vc_column_text]Some major clutch problems… Who made these BMWs?![/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text][/vc_column_text][/vc_column][vc_column][/vc_column][/vc_row][vc_row][vc_column][product_mod id=”6039″][/vc_column][/vc_row]
Similar Posts
New partner! pept.fi
We’re happy to announce that we have a new partner for this season! Welcome onboard pept.fi and thank you for the support! We met Andre from pept at the Hot Rod & Rock show in Tampere where our car was on show and he sure had some great stories about partnerships. Have a look at…
Video: Venetsia Drifting 2019
THE CAR FINALLY WORKS! We have been struggling for a long time (some 4 years) with the CDI ECU. In this episode it is finally a lot better, still a lot to do but the Bosch EDC16 has never worked so well. You can really see the result, just watch! For us to be able…
Building the rear | 31-2020
Fixing the aesthetic on the car. Teemu is acting as the architect. Release discount – 15% in the shop with coupon “312020”
ENGINE ADVENTURE | GARBAGE GARAGE 2-2018
Spoiler: the engine goes on an adventure! We are on fire, the engine has been removed and Jesse now has the ball on his side of the court. See the whole story on our second episode of season 2018. We will soon do a bigger write up on what is going on with the setup…
Modifications to the OM648 engine
Because this is a new engine for us, we don’t know the weak spots of it yet. Those will come up later fo sure, but we decided to strengthen the block a bit with griddle plate and ARP bolts. Hard bolts from ARP was used to secure connection rods to crank shaft. Hopefully we can…
FIRST THINGS FIRST – GARBAGE GARAGE 1/2018
Yes, we are trying to fire it up again! Here is the first episode of the 2018 garage adventures. It is now almost too late to start working for 2018, so we decided to start, however, Nikos BMW needed a tyre change and the racecar was still in the bus. The video speaks pretty much…